<?XML Version="1.0">
<nidocument>
<nicomment>
<nifamily familyname="IMAQ Vision" displayname="IMAQ Vision">
</nifamily>
</nicomment>
<nierror code="-1074396200">
IMAQ Vision:  No error.
</nierror>
<nierror code="-1074396160">
IMAQ Vision:  (Hex 0xBFF60400) System error.
</nierror>
<nierror code="-1074396159">
IMAQ Vision:  Not enough memory for requested operation.
</nierror>
<nierror code="-1074396158">
IMAQ Vision:  Memory error.
</nierror>
<nierror code="-1074396157">
IMAQ Vision:  Unlicensed copy of IMAQ Vision.
</nierror>
<nierror code="-1074396156">
IMAQ Vision:  The function requires an IMAQ Vision 5.0 Advanced license.
</nierror>
<nierror code="-1074396155">
IMAQ Vision:  IMAQ Vision did not initialize properly.
</nierror>
<nierror code="-1074396154">
IMAQ Vision:  The image is not large enough for the operation.
</nierror>
<nierror code="-1074396153">
IMAQ Vision:  The barcode is not a valid Codabar barcode.
</nierror>
<nierror code="-1074396152">
IMAQ Vision:  The barcode is not a valid Code 3 of 9 barcode.
</nierror>
<nierror code="-1074396151">
IMAQ Vision:  The barcode is not a valid Code93 barcode.
</nierror>
<nierror code="-1074396150">
IMAQ Vision:  The barcode is not a valid Code128 barcode.
</nierror>
<nierror code="-1074396149">
IMAQ Vision:  The barcode is not a valid EAN8 barcode.
</nierror>
<nierror code="-1074396148">
IMAQ Vision:  The barcode is not a valid EAN13 barcode.
</nierror>
<nierror code="-1074396147">
IMAQ Vision:  The barcode is not a valid Interleaved 2 of 5 barcode.
</nierror>
<nierror code="-1074396146">
IMAQ Vision:  The barcode is not a valid MSI barcode.
</nierror>
<nierror code="-1074396145">
IMAQ Vision:  The barcode is not a valid UPCA barcode.
</nierror>
<nierror code="-1074396144">
IMAQ Vision:  The Code93 barcode contains an invalid shift encoding.
</nierror>
<nierror code="-1074396143">
IMAQ Vision:  The barcode type is invalid.
</nierror>
<nierror code="-1074396142">
IMAQ Vision:  The image does not represent a valid linear barcode.
</nierror>
<nierror code="-1074396141">
IMAQ Vision:  The FNC value in the Code128 barcode is not before the first data value.
</nierror>
<nierror code="-1074396140">
IMAQ Vision:  The starting code set in the Code128 barcode is not valid.
</nierror>
<nierror code="-1074396139">
IMAQ Vision:  Not enough reserved memory in the timed environment for the requested operation.
</nierror>
<nierror code="-1074396138">
IMAQ Vision:  The function is not supported when a time limit is active.
</nierror>
<nierror code="-1074396137">
IMAQ Vision:  (Hex 0xBFF60417) Quartz.dll not found.  Install DirectX 8.1 or later.
</nierror>
<nierror code="-1074396136">
IMAQ Vision:  The filter quality you provided is invalid. Valid quality values range from -1 to 1000.
</nierror>
<nierror code="-1074396129">
IMAQ Vision:  During timed execution, you must use the preallocated version of this operation.
</nierror>
<nierror code="-1074396128">
IMAQ Vision:  An image being modified by one process cannot be requested by another process while a time limit is active.
</nierror>
<nierror code="-1074396127">
IMAQ Vision:  An image with pattern matching, calibration, or overlay information cannot be manipulated while a time limit is active.
</nierror>
<nierror code="-1074396126">
IMAQ Vision:  An image created before a time limit is started cannot be resized while a time limit is active.
</nierror>
<nierror code="-1074396125">
IMAQ Vision:  Invalid contrast threshold. The theshold value must be greater than 0. 
</nierror>
<nierror code="-1074396124">
IMAQ Vision:  IMAQ Vision does not support the calibration ROI mode you supplied.
</nierror>
<nierror code="-1074396123">
IMAQ Vision:  IMAQ Vision does not support the calibration mode you supplied.
</nierror>
<nierror code="-1074396122">
IMAQ Vision:  Set the foreground and background text colors to grayscale to draw on a U8 image.
</nierror>
<nierror code="-1074396121">
IMAQ Vision:  The value of the saturation threshold must be from 0 to 255.
</nierror>
<nierror code="-1074396120">
IMAQ Vision:  Not an image.
</nierror>
<nierror code="-1074396119">
IMAQ Vision:  Image not connected.
</nierror>
<nierror code="-1074396118">
IMAQ Vision:  Image not connected.
</nierror>
<nierror code="-1074396117">
IMAQ Vision:  Invalid matrix size in the structuring element.
</nierror>
<nierror code="-1074396116">
IMAQ Vision:  Insufficient number of calibration feature points.
</nierror>
<nierror code="-1074396115">
IMAQ Vision:  Operation is invalid in a corrected image
</nierror>
<nierror code="-1074396114">
IMAQ Vision:  ROI contains invalid contour type or not contained in learnt ROI
</nierror>
<nierror code="-1074396113">
IMAQ Vision:  Source/Input Image has not been calibrated
</nierror>
<nierror code="-1074396112">
IMAQ Vision:  Arrays Size must match
</nierror>
<nierror code="-1074396111">
IMAQ Vision:  Unable to auto detect grid: image is too distorted
</nierror>
<nierror code="-1074396110">
IMAQ Vision:  Invalid calibration information version.
</nierror>
<nierror code="-1074396109">
IMAQ Vision:  Invalid calibration scaling factor.
</nierror>
<nierror code="-1074396108">
IMAQ Vision:  The calibration error map cannot be computed.
</nierror>
<nierror code="-1074396107">
IMAQ Vision:  Invalid calibration template image.
</nierror>
<nierror code="-1074396106">
IMAQ Vision:  Invalid calibration template image.
</nierror>
<nierror code="-1074396105">
IMAQ Vision:  Invalid calibration template image.
</nierror>
<nierror code="-1074396104">
IMAQ Vision:  Invalid calibration template image.
</nierror>
<nierror code="-1074396103">
IMAQ Vision:  Invalid calibration template image.
</nierror>
<nierror code="-1074396102">
IMAQ Vision:  Invalid calibration template image.
</nierror>
<nierror code="-1074396101">
IMAQ Vision:  Invalid calibration template image.
</nierror>
<nierror code="-1074396100">
IMAQ Vision:  Invalid calibration template image.
</nierror>
<nierror code="-1074396099">
IMAQ Vision:  Invalid calibration template image.
</nierror>
<nierror code="-1074396098">
IMAQ Vision:  You must pass NULL for the reserved parameter.
</nierror>
<nierror code="-1074396097">
IMAQ Vision:  You entered an invalid selection in the particle parameter.
</nierror>
<nierror code="-1074396096">
IMAQ Vision:  Not an object.
</nierror>
<nierror code="-1074396095">
IMAQ Vision:  The reference points passed are inconsistent.  At least two similar pixel coordinates correspond to different real world coordinates.
</nierror>
<nierror code="-1074396094">
IMAQ Vision:  A resource conflict occurred in the timed environment. Two processes cannot manage the same resource and be time bounded.
</nierror>
<nierror code="-1074396093">
IMAQ Vision:  A resource conflict occurred in the timed environment. Two processes cannot access the same resource and be time bounded.
</nierror>
<nierror code="-1074396092">
IMAQ Vision:  Multiple timed environments are not supported.
</nierror>
<nierror code="-1074396091">
IMAQ Vision:  A time limit cannot be started until the timed environment is initialized.
</nierror>
<nierror code="-1074396090">
IMAQ Vision:  Multiple timed environments are not supported.
</nierror>
<nierror code="-1074396089">
IMAQ Vision:  The timed environment is already initialized.
</nierror>
<nierror code="-1074396088">
IMAQ Vision:  The results of the operation exceeded the size limits on the output data arrays.
</nierror>
<nierror code="-1074396087">
IMAQ Vision:  No time limit is available to stop.
</nierror>
<nierror code="-1074396086">
IMAQ Vision:  A time limit could not be set.
</nierror>
<nierror code="-1074396085">
IMAQ Vision:  The timed environment could not be initialized.
</nierror>
<nierror code="-1074396084">
IMAQ Vision:  No initialized timed environment is avialable to close.
</nierror>
<nierror code="-1074396083">
IMAQ Vision:  The time limit has expired.
</nierror>
<nierror code="-1074396082">
IMAQ Vision:  A palette is only supported for 8-bit images.  Either don't use a palette, or convert your image to an 8-bit image before using a palette.
</nierror>
<nierror code="-1074396081">
IMAQ Vision:  Incorrect password.
</nierror>
<nierror code="-1074396080">
IMAQ Vision:  Invalid image type.
</nierror>
<nierror code="-1074396079">
IMAQ Vision:  Invalid metafile handle.
</nierror>
<nierror code="-1074396078">
IMAQ Vision:  Invalid image type.
</nierror>
<nierror code="-1074396077">
IMAQ Vision:  Incompatible image type.
</nierror>
<nierror code="-1074396076">
IMAQ Vision:  Incompatible image type.
</nierror>
<nierror code="-1074396075">
IMAQ Vision:  Incompatible image type.
</nierror>
<nierror code="-1074396074">
IMAQ Vision:  Incompatible image size.
</nierror>
<nierror code="-1074396073">
IMAQ Vision:  Incompatible image size.
</nierror>
<nierror code="-1074396072">
IMAQ Vision:  Invalid image border.
</nierror>
<nierror code="-1074396071">
IMAQ Vision:  Invalid image border.
</nierror>
<nierror code="-1074396070">
IMAQ Vision:  Unsupported function.
</nierror>
<nierror code="-1074396069">
IMAQ Vision:  IMAQ Vision does not support the color mode you specified.
</nierror>
<nierror code="-1074396068">
IMAQ Vision:  The function does not support the requested action.
</nierror>
<nierror code="-1074396067">
IMAQ Vision:  Source and destination images must be different.
</nierror>
<nierror code="-1074396066">
IMAQ Vision:  Invalid point symbol
</nierror>
<nierror code="-1074396065">
IMAQ Vision:  Cannot resize an image in an acquisition buffer.
</nierror>
<nierror code="-1074396064">
IMAQ Vision:  This operation is not supported for images in an acquisition buffer.
</nierror>
<nierror code="-1074396063">
IMAQ Vision:  The external buffer must be aligned on an 4 byte boundary.  The line width and border pixels must be 4 byte aligned as well.
</nierror>
<nierror code="-1074396040">
IMAQ Vision:  Cannot access NI-IMAQ driver.
</nierror>
<nierror code="-1074396039">
IMAQ Vision:  I/O error.
</nierror>
<nierror code="-1074396038">
IMAQ Vision:  Board not found.
</nierror>
<nierror code="-1074396037">
IMAQ Vision:  Trigger timeout.
</nierror>
<nierror code="-1074396036">
IMAQ Vision:  The Skeleton mode you specified is invalid.
</nierror>
<nierror code="-1074396035">
IMAQ Vision:  The template image does not contain enough information for learning the aggressive search strategy.
</nierror>
<nierror code="-1074396034">
IMAQ Vision:  The template image does not contain enough edge information for the sample size(s) requested.
</nierror>
<nierror code="-1074396033">
IMAQ Vision:  Invalid template descriptor.
</nierror>
<nierror code="-1074396032">
IMAQ Vision:  The template descriptor does not contain data required for the requested search strategy in rotation-invariant matching.
</nierror>
<nierror code="-1074396016">
IMAQ Vision:  No video driver installed.
</nierror>
<nierror code="-1074396015">
IMAQ Vision:  Unable to establish network connection with remote system.
</nierror>
<nierror code="-1074396015">
IMAQ Vision:  Unable to establish network connection with remote system.
</nierror>
<nierror code="-1074396014">
IMAQ Vision:  Invalid video out blit function.
</nierror>
<nierror code="-1074396013">
IMAQ Vision:  Invalid video mode.
</nierror>
<nierror code="-1074396012">
IMAQ Vision:  Unable to display remote image on network connection.
</nierror>
<nierror code="-1074396011">
IMAQ Vision:  Unable to establish network connection.
</nierror>
<nierror code="-1074396010">
IMAQ Vision:  Invalid frame number.
</nierror>
<nierror code="-1074396009">
IMAQ Vision:  DirectX error.
</nierror>
<nierror code="-1074396008">
IMAQ Vision:  No DirectX filter found.
</nierror>
<nierror code="-1074396007">
IMAQ Vision:  Incompatible compression filter.
</nierror>
<nierror code="-1074396006">
IMAQ Vision:  Unknown compression filter.
</nierror>
<nierror code="-1074396005">
IMAQ Vision:  Invalid AVI session.
</nierror>
<nierror code="-1074396004">
IMAQ Vision:  A software key is restricting the use of this compression filter.
</nierror>
<nierror code="-1074396003">
IMAQ Vision:  The data for this frame exceeds the data buffer size specified when creating the AVI file.
</nierror>
<nierror code="-1074396002">
IMAQ Vision:  Invalid line gauge method.
</nierror>
<nierror code="-1074396000">
IMAQ Vision:  Invalid file header.
</nierror>
<nierror code="-1074395999">
IMAQ Vision:  Invalid file type.
</nierror>
<nierror code="-1074395998">
IMAQ Vision:  Invalid color table.
</nierror>
<nierror code="-1074395997">
IMAQ Vision:  Invalid parameter.
</nierror>
<nierror code="-1074395996">
IMAQ Vision:  File is already open for writing.
</nierror>
<nierror code="-1074395995">
IMAQ Vision:  File not found.
</nierror>
<nierror code="-1074395994">
IMAQ Vision:  Too many files open.
</nierror>
<nierror code="-1074395993">
IMAQ Vision:  File I/O error.
</nierror>
<nierror code="-1074395992">
IMAQ Vision:  File access denied.
</nierror>
<nierror code="-1074395991">
IMAQ Vision:  IMAQ Vision does not support the file type you specified.
</nierror>
<nierror code="-1074395990">
IMAQ Vision:  Could not read Vision info from file.
</nierror>
<nierror code="-1074395989">
IMAQ Vision:  Unable to read data.
</nierror>
<nierror code="-1074395988">
IMAQ Vision:  Unable to write data.
</nierror>
<nierror code="-1074395987">
IMAQ Vision:  Premature end of file.
</nierror>
<nierror code="-1074395986">
IMAQ Vision:  Invalid file format.
</nierror>
<nierror code="-1074395985">
IMAQ Vision:  Invalid file operation.
</nierror>
<nierror code="-1074395984">
IMAQ Vision:  IMAQ Vision does not support the file data type you specified.
</nierror>
<nierror code="-1074395983">
IMAQ Vision:  Disk full.
</nierror>
<nierror code="-1074395982">
IMAQ Vision:  The frames per second in an AVI must be greater than zero.
</nierror>
<nierror code="-1074395981">
IMAQ Vision:  The buffer that was passed in is not big enough to hold all of the data.
</nierror>
<nierror code="-1074395980">
IMAQ Vision:  Error initializing COM.
</nierror>
<nierror code="-1074395979">
IMAQ Vision:  The image has invalid particle information.  Call imaqCountParticles on the image to create particle information.
</nierror>
<nierror code="-1074395978">
IMAQ Vision:  Invalid particle number.
</nierror>
<nierror code="-1074395977">
IMAQ Vision:  The AVI file was created in a newer version of IMAQ Vision. Upgrade to a higher version of IMAQ Vision to read this AVI file.
</nierror>
<nierror code="-1074395976">
IMAQ Vision:  The color palette must have exactly 0 or 256 entries.
</nierror>
<nierror code="-1074395960">
IMAQ Vision:  Initialization error.
</nierror>
<nierror code="-1074395959">
IMAQ Vision:  Unable to create window.
</nierror>
<nierror code="-1074395958">
IMAQ Vision:  Invalid window ID.
</nierror>
<nierror code="-1074395957">
IMAQ Vision:  The array sizes are not compatible.
</nierror>
<nierror code="-1074395920">
IMAQ Vision:  Invalid number of classes.
</nierror>
<nierror code="-1074395880">
IMAQ Vision:  Invalid particle.
</nierror>
<nierror code="-1074395879">
IMAQ Vision:  Invalid measure number.
</nierror>
<nierror code="-1074395878">
IMAQ Vision:  The Image Display Control does not support writing this property node.
</nierror>
<nierror code="-1074395877">
IMAQ Vision:  The specified color mode requires the use of imaqChangeColorSpace2.
</nierror>
<nierror code="-1074395876">
IMAQ Vision:  This function does not currently support the color mode you specified.
</nierror>
<nierror code="-1074395840">
IMAQ Vision:  Invalid handle table index.
</nierror>
<nierror code="-1074395839">
IMAQ Vision:  Error while locking handle.
</nierror>
<nierror code="-1074395838">
IMAQ Vision:  Error while unlocking handle.
</nierror>
<nierror code="-1074395800">
IMAQ Vision:  Protection error.
</nierror>
<nierror code="-1074395799">
IMAQ Vision:  Internal error.
</nierror>
<nierror code="-1074395760">
IMAQ Vision:  Board not found.
</nierror>
<nierror code="-1074395759">
IMAQ Vision:  I/O error.
</nierror>
<nierror code="-1074395758">
IMAQ Vision:  Board not opened.
</nierror>
<nierror code="-1074395757">
IMAQ Vision:  DLL not found.
</nierror>
<nierror code="-1074395756">
IMAQ Vision:  DLL function not found.
</nierror>
<nierror code="-1074395755">
IMAQ Vision:  Internal error.
</nierror>
<nierror code="-1074395754">
IMAQ Vision:  Trigger timeout.
</nierror>
<nierror code="-1074395720">
IMAQ Vision:  Invalid ROI.
</nierror>
<nierror code="-1074395719">
IMAQ Vision:  Invalid ROI global rectangle.
</nierror>
<nierror code="-1074395718">
IMAQ Vision:  The version of LabVIEW or BridgeVIEW you are running does not support this operation.
</nierror>
<nierror code="-1074395717">
IMAQ Vision:  The range you supplied is invalid.
</nierror>
<nierror code="-1074395716">
IMAQ Vision:  IMAQ Vision does not support the scaling method you provided.
</nierror>
<nierror code="-1074395715">
IMAQ Vision:  IMAQ Vision does not support the calibration unit you supplied.
</nierror>
<nierror code="-1074395714">
IMAQ Vision:  IMAQ Vision does not support the axis orientation you supplied.
</nierror>
<nierror code="-1074395713">
IMAQ Vision:  Value not in enumeration.
</nierror>
<nierror code="-1074395712">
IMAQ Vision:  You selected a region that is not of the right type.
</nierror>
<nierror code="-1074395711">
IMAQ Vision:  You specified a viewer that does not contain enough regions.
</nierror>
<nierror code="-1074395710">
IMAQ Vision:  The image has too many particles for this process.
</nierror>
<nierror code="-1074395709">
IMAQ Vision:  The AVI session has not been opened.
</nierror>
<nierror code="-1074395708">
IMAQ Vision:  The AVI session is a write session, and this operation requires a read session.
</nierror>
<nierror code="-1074395707">
IMAQ Vision:  The AVI session is a read session, and this operation requires a write session.
</nierror>
<nierror code="-1074395706">
IMAQ Vision:  This AVI session is already open.  You must close it before calling Create or Open.
</nierror>
<nierror code="-1074395705">
IMAQ Vision:  The data attached to this AVI has been corrupted.
</nierror>
<nierror code="-1074395600">
IMAQ Vision:  You did not provide information about the subimage within the browser.
</nierror>
<nierror code="-1074395599">
IMAQ Vision:  Use error codes from this one to LAST_NIOCR_ERROR for NI trainable OCR alone
</nierror>
<nierror code="-1074395598">
IMAQ Vision:  The acceptance level is outside the valid range of  0 to 1000.
</nierror>
<nierror code="-1074395597">
IMAQ Vision:  Not a valid NI OCR session.
</nierror>
<nierror code="-1074395596">
IMAQ Vision:  Invalid character size. Character size must be >= 1.
</nierror>
<nierror code="-1074395595">
IMAQ Vision:  Invalid threshold mode value.
</nierror>
<nierror code="-1074395594">
IMAQ Vision:  Invalid substitution character. Valid substitution characters are ASCII values in the range 1-254.
</nierror>
<nierror code="-1074395593">
IMAQ Vision:  Invalid number of blocks. Number of blocks must be >= 4 and <= 50.
</nierror>
<nierror code="-1074395592">
IMAQ Vision:  Invalid read strategy.
</nierror>
<nierror code="-1074395591">
IMAQ Vision:  Invalid character index.
</nierror>
<nierror code="-1074395590">
IMAQ Vision:  Invalid number of character positions. Valid values are between 0 and 255.
</nierror>
<nierror code="-1074395589">
IMAQ Vision:  Invalid low threshold value. Valid threshold values range from 0 to 255.
</nierror>
<nierror code="-1074395588">
IMAQ Vision:  Invalid high threshold value. Valid threshold values range from 0 to 255.
</nierror>
<nierror code="-1074395587">
IMAQ Vision:  The low threshold must be less than the high threshold.
</nierror>
<nierror code="-1074395586">
IMAQ Vision:  Invalid lower threshold limit. Valid lower threshold limits range from 0 to 255.
</nierror>
<nierror code="-1074395585">
IMAQ Vision:  Invalid upper threshold limit. Valid upper threshold limits range from 0 to 255.
</nierror>
<nierror code="-1074395584">
IMAQ Vision:  The lower threshold limit must be less than the upper threshold limit.
</nierror>
<nierror code="-1074395583">
IMAQ Vision:  Invalid minimum character spacing value. Character spacing must be >= 0 pixels.
</nierror>
<nierror code="-1074395582">
IMAQ Vision:  Invalid maximum horizontal element spacing value. Maximum horizontal element spacing must be >= 0.
</nierror>
<nierror code="-1074395581">
IMAQ Vision:  Invalid maximum vertical element spacing value. Maximum vertical element spacing must be >= 0.
</nierror>
<nierror code="-1074395580">
IMAQ Vision:  Invalid minimum bounding rectangle width. Minimum bounding rectangle width must be >= 1.
</nierror>
<nierror code="-1074395579">
IMAQ Vision:  Invalid aspect ratio value. The aspect ratio must be zero or >= 100.
</nierror>
<nierror code="-1074395578">
IMAQ Vision:  Invalid or corrupt character set file.
</nierror>
<nierror code="-1074395577">
IMAQ Vision:  The character value must not be an empty string.
</nierror>
<nierror code="-1074395576">
IMAQ Vision:  Character values must be <=255 characters.
</nierror>
<nierror code="-1074395575">
IMAQ Vision:  Invalid number of erosions. The number of erosions must be >= 0.
</nierror>
<nierror code="-1074395574">
IMAQ Vision:  The character set description must be <=255 characters.
</nierror>
<nierror code="-1074395573">
IMAQ Vision:  The character set file was created by a newer version of NI OCR.
</nierror>
<nierror code="-1074395572">
IMAQ Vision:  You must specify characters for a string. A string cannot contain integers.
</nierror>
<nierror code="-1074395571">
IMAQ Vision:  This attribute is read-only.
</nierror>
<nierror code="-1074395570">
IMAQ Vision:  This attribute requires a boolean value.
</nierror>
<nierror code="-1074395569">
IMAQ Vision:  Invalid attribute.
</nierror>
<nierror code="-1074395568">
IMAQ Vision:  This attribute requires integer values.
</nierror>
<nierror code="-1074395567">
IMAQ Vision:  String values are invalid for this attribute. Enter a boolean value.
</nierror>
<nierror code="-1074395566">
IMAQ Vision:  Boolean values are not valid for this attribute. Enter an integer value.
</nierror>
<nierror code="-1074395565">
IMAQ Vision:  Requires a single-character string.
</nierror>
<nierror code="-1074395564">
IMAQ Vision:  Invalid predefined character value.
</nierror>
<nierror code="-1074395563">
IMAQ Vision:  This copy of NI OCR is unlicensed.
</nierror>
<nierror code="-1074395562">
IMAQ Vision:  String values are not valid for this attribute. Enter a boolean value.
</nierror>
<nierror code="-1074395561">
IMAQ Vision:  The number of characters in the character value must match the number of objects in the image.
</nierror>
<nierror code="-1074395560">
IMAQ Vision:  Invalid object index.
</nierror>
<nierror code="-1074395559">
IMAQ Vision:  Invalid read option.
</nierror>
<nierror code="-1074395558">
IMAQ Vision:  The minimum character size must be less than the maximum character size.
</nierror>
<nierror code="-1074395557">
IMAQ Vision:  The minimum character bounding rectangle width must be less than the maximum character bounding rectangle width.
</nierror>
<nierror code="-1074395556">
IMAQ Vision:  The minimum character bounding rectangle height must be less than the maximum character bounding rectangle height.
</nierror>
<nierror code="-1074395555">
IMAQ Vision:  The maximum horizontal element spacing value must not exceed the minimum character spacing value.
</nierror>
<nierror code="-1074395554">
IMAQ Vision:  Invalid read resolution.
</nierror>
<nierror code="-1074395553">
IMAQ Vision:  Invalid minimum bounding rectangle height. The minimum bounding rectangle height must be >= 1.
</nierror>
<nierror code="-1074395552">
IMAQ Vision:  Not a valid character set.
</nierror>
<nierror code="-1074395500">
IMAQ Vision:  This is the last ni ocr error code that you can use.
</nierror>
<nierror code="-1074395499">
IMAQ Vision:  This is the first Display Test error code that you can use.
</nierror>
<nierror code="-1074395411">
IMAQ Vision:  This is the last Display Test error code that you can use.
</nierror>
<nierror code="-1074395410">
IMAQ Vision:  IMAQ Vision does not support less then one icon per line.
</nierror>
<nierror code="-1074395409">
IMAQ Vision:  Invalid subpixel divisions.
</nierror>
<nierror code="-1074395408">
IMAQ Vision:  Invalid detection mode.
</nierror>
<nierror code="-1074395407">
IMAQ Vision:  Invalid contrast value. Valid contrast values range from 0 to 255.
</nierror>
<nierror code="-1074395406">
IMAQ Vision:  The coordinate system could not be found on this image.
</nierror>
<nierror code="-1074395405">
IMAQ Vision:  IMAQ Vision does not support the text orientation value you supplied.
</nierror>
<nierror code="-1074395404">
IMAQ Vision:  UnwrapImage does not support the interpolation method value you supplied.  Valid interpolation methods are zero order and bilinear. 
</nierror>
<nierror code="-1074395403">
IMAQ Vision:  You are trying to load an image saved with a version later than your current version of IMAQ Vision.
</nierror>
<nierror code="-1074395402">
IMAQ Vision:  The function does not support the value for maximum number of points that you specified.
</nierror>
<nierror code="-1074395401">
IMAQ Vision:  The function does not support the matchFactor that you specified.
</nierror>
<nierror code="-1074395400">
IMAQ Vision:  8-bit image expected.
</nierror>
<nierror code="-1074395399">
IMAQ Vision:  16-bit image expected.
</nierror>
<nierror code="-1074395398">
IMAQ Vision:  Floating-point image expected.
</nierror>
<nierror code="-1074395397">
IMAQ Vision:  Complex image required.
</nierror>
<nierror code="-1074395396">
IMAQ Vision:  RGB image expected.
</nierror>
<nierror code="-1074395395">
IMAQ Vision:  The input image must be a color image.
</nierror>
<nierror code="-1074395394">
IMAQ Vision:  The color mask removes too much color information.
</nierror>
<nierror code="-1074395393">
IMAQ Vision:  The color template image is too small.
</nierror>
<nierror code="-1074395392">
IMAQ Vision:  The color template image is too large.
</nierror>
<nierror code="-1074395391">
IMAQ Vision:  The contrast in the image's hue plane is too low for learning shape features.
</nierror>
<nierror code="-1074395390">
IMAQ Vision:  The contrast in the image's luminance plane is too low to learn shape features.
</nierror>
<nierror code="-1074395389">
IMAQ Vision:  Invalid color learn setup data.
</nierror>
<nierror code="-1074395388">
IMAQ Vision:  Invalid color learn setup data.
</nierror>
<nierror code="-1074395387">
IMAQ Vision:  Invalid color match setup data.
</nierror>
<nierror code="-1074395386">
IMAQ Vision:  Invalid color match setup data.
</nierror>
<nierror code="-1074395385">
IMAQ Vision:  Rotation-invariant color pattern matching requires a feature mode including shape.
</nierror>
<nierror code="-1074395384">
IMAQ Vision:  Invalid color template image.
</nierror>
<nierror code="-1074395383">
IMAQ Vision:  Invalid color template image.
</nierror>
<nierror code="-1074395382">
IMAQ Vision:  Invalid color template image.
</nierror>
<nierror code="-1074395381">
IMAQ Vision:  Invalid color template image.
</nierror>
<nierror code="-1074395380">
IMAQ Vision:  Invalid color template image.
</nierror>
<nierror code="-1074395379">
IMAQ Vision:  Invalid color template image.
</nierror>
<nierror code="-1074395378">
IMAQ Vision:  Invalid color template image.
</nierror>
<nierror code="-1074395377">
IMAQ Vision:  Invalid color template image.
</nierror>
<nierror code="-1074395376">
IMAQ Vision:  The color template image does not contain data required for shift-invariant color matching.
</nierror>
<nierror code="-1074395375">
IMAQ Vision:  Invalid color template image.
</nierror>
<nierror code="-1074395374">
IMAQ Vision:  Invalid color template image.
</nierror>
<nierror code="-1074395373">
IMAQ Vision:  Invalid color template image.
</nierror>
<nierror code="-1074395372">
IMAQ Vision:  The color template image does not contain data required for rotation-invariant color matching.
</nierror>
<nierror code="-1074395371">
IMAQ Vision:  Invalid color template image.
</nierror>
<nierror code="-1074395370">
IMAQ Vision:  Invalid color template image.
</nierror>
<nierror code="-1074395369">
IMAQ Vision:  Invalid color template image.
</nierror>
<nierror code="-1074395368">
IMAQ Vision:  Invalid color template image.
</nierror>
<nierror code="-1074395367">
IMAQ Vision:  Invalid color template image.
</nierror>
<nierror code="-1074395366">
IMAQ Vision:  The color template image does not contain data required for color matching in shape feature mode.
</nierror>
<nierror code="-1074395365">
IMAQ Vision:  The color template image does not contain data required for color matching in color feature mode.
</nierror>
<nierror code="-1074395364">
IMAQ Vision:  The ignore color spectra array is invalid.
</nierror>
<nierror code="-1074395363">
IMAQ Vision:  Invalid subsampling ratio.
</nierror>
<nierror code="-1074395362">
IMAQ Vision:  Invalid pixel width.
</nierror>
<nierror code="-1074395361">
IMAQ Vision:  Invalid steepness.
</nierror>
<nierror code="-1074395360">
IMAQ Vision:  Invalid complex plane.
</nierror>
<nierror code="-1074395357">
IMAQ Vision:  Invalid color ignore mode.
</nierror>
<nierror code="-1074395356">
IMAQ Vision:  Invalid minimum match score.  Acceptable values range from 0 to 1,000.
</nierror>
<nierror code="-1074395355">
IMAQ Vision:  Invalid number of matches requested. You must request a minimum of one match.
</nierror>
<nierror code="-1074395354">
IMAQ Vision:  Invalid color weight. Acceptable values range from 0 to 1,000.
</nierror>
<nierror code="-1074395353">
IMAQ Vision:  Invalid search strategy.
</nierror>
<nierror code="-1074395352">
IMAQ Vision:  Invalid feature mode.
</nierror>
<nierror code="-1074395351">
IMAQ Vision:  IMAQ Vision does not support rectangles with negative widths or negative heights.
</nierror>
<nierror code="-1074395350">
IMAQ Vision:  IMAQ Vision does not support the vision information type you supplied.
</nierror>
<nierror code="-1074395349">
IMAQ Vision:  IMAQ Vision does not support the SkeletonMethod value you supplied.
</nierror>
<nierror code="-1074395348">
IMAQ Vision:  IMAQ Vision does not support the 3DPlane value you supplied.
</nierror>
<nierror code="-1074395347">
IMAQ Vision:  IMAQ Vision does not support the 3DDirection value you supplied.
</nierror>
<nierror code="-1074395346">
IMAQ Vision:  imaqRotate does not support the InterpolationMethod value you supplied.
</nierror>
<nierror code="-1074395345">
IMAQ Vision:  IMAQ Vision does not support the FlipAxis value you supplied.
</nierror>
<nierror code="-1074395343">
IMAQ Vision:  You must pass a valid file name. Do not pass in NULL.
</nierror>
<nierror code="-1074395340">
IMAQ Vision:  IMAQ Vision does not support the SizeType value you supplied.
</nierror>
<nierror code="-1074395334">
IMAQ Vision:  IMAQ Vision does not support the Conversion Method value you supplied.
</nierror>
<nierror code="-1074395333">
IMAQ Vision:  IMAQ Vision does not support the VerticalTextAlignment value you supplied.
</nierror>
<nierror code="-1074395332">
IMAQ Vision:  IMAQ Vision does not support the CompareFunction value you supplied.
</nierror>
<nierror code="-1074395331">
IMAQ Vision:  IMAQ Vision does not support the BorderMethod value you supplied.
</nierror>
<nierror code="-1074395330">
IMAQ Vision:  The border size is not within the valid range (0-50).
</nierror>
<nierror code="-1074395329">
IMAQ Vision:  IMAQ Vision does not support the OutlineMethod value you supplied.
</nierror>
<nierror code="-1074395328">
IMAQ Vision:  IMAQ Vision does not support the InterpolationMethod value you supplied.
</nierror>
<nierror code="-1074395327">
IMAQ Vision:  IMAQ Vision does not support the ScalingMode value you supplied.
</nierror>
<nierror code="-1074395326">
IMAQ Vision:  imaqDrawLineOnImage does not support the DrawMode value you supplied.
</nierror>
<nierror code="-1074395325">
IMAQ Vision:  IMAQ Vision does not support the DrawMode value you supplied.
</nierror>
<nierror code="-1074395324">
IMAQ Vision:  IMAQ Vision does not support the ShapeMode value you supplied.
</nierror>
<nierror code="-1074395323">
IMAQ Vision:  IMAQ Vision does not support the FontColor value you supplied.
</nierror>
<nierror code="-1074395322">
IMAQ Vision:  IMAQ Vision does not support the TextAlignment value you supplied.
</nierror>
<nierror code="-1074395321">
IMAQ Vision:  IMAQ Vision does not support the MorphologyMethod value you supplied.
</nierror>
<nierror code="-1074395320">
IMAQ Vision:  The template image is empty.
</nierror>
<nierror code="-1074395319">
IMAQ Vision:  IMAQ Vision does not support the interpolation type you supplied.
</nierror>
<nierror code="-1074395318">
IMAQ Vision:  You supplied insufficient points to perform this operation.
</nierror>
<nierror code="-1074395317">
IMAQ Vision:  You specified a point that lies outside the image.
</nierror>
<nierror code="-1074395316">
IMAQ Vision:  Invalid kernel code.
</nierror>
<nierror code="-1074395310">
IMAQ Vision:  IMAQ Vision does not support the PaletteType value you supplied.
</nierror>
<nierror code="-1074395309">
IMAQ Vision:  IMAQ Vision does not support the WindowThreadPolicy value you supplied.
</nierror>
<nierror code="-1074395308">
IMAQ Vision:  IMAQ Vision does not support the ColorSensitivity value you supplied.
</nierror>
<nierror code="-1074395307">
IMAQ Vision:  The precision parameter must be greater than 0.
</nierror>
<nierror code="-1074395306">
IMAQ Vision:  IMAQ Vision does not support the Tool value you supplied.
</nierror>
<nierror code="-1074395305">
IMAQ Vision:  IMAQ Vision does not support the ReferenceMode value you supplied.
</nierror>
<nierror code="-1074395304">
IMAQ Vision:  IMAQ Vision does not support the MathTransformMethod value you supplied.
</nierror>
<nierror code="-1074395303">
IMAQ Vision:  The number of classes for auto threshold is not within the valid range (2-256).
</nierror>
<nierror code="-1074395302">
IMAQ Vision:  IMAQ Vision does not support the ThresholdMethod value you supplied.
</nierror>
<nierror code="-1074395301">
IMAQ Vision:  The ROI you passed into imaqGetMeterArc must consist of two lines.
</nierror>
<nierror code="-1074395300">
IMAQ Vision:  IMAQ Vision does not support the MeterArcMode value you supplied.
</nierror>
<nierror code="-1074395299">
IMAQ Vision:  IMAQ Vision does not support the ComplexPlane value you supplied.
</nierror>
<nierror code="-1074395298">
IMAQ Vision:  You can perform this operation on a real or an imaginary ComplexPlane only.
</nierror>
<nierror code="-1074395297">
IMAQ Vision:  IMAQ Vision does not support the ParticleInfoMode value you supplied.
</nierror>
<nierror code="-1074395296">
IMAQ Vision:  IMAQ Vision does not support the BarcodeType value you supplied.
</nierror>
<nierror code="-1074395295">
IMAQ Vision:  imaqInterpolatePoints does not support the InterpolationMethod value you supplied.
</nierror>
<nierror code="-1074395294">
IMAQ Vision:  The contour index you supplied is larger than the number of contours in the ROI.
</nierror>
<nierror code="-1074395293">
IMAQ Vision:  The supplied ContourID did not correlate to a contour inside the ROI.
</nierror>
<nierror code="-1074395292">
IMAQ Vision:  You should not supply collinear points for this operation.
</nierror>
<nierror code="-1074395291">
IMAQ Vision:  Shape Match requires the image to contain only pixel values of 0 or 1.
</nierror>
<nierror code="-1074395290">
IMAQ Vision:  The template you supplied for ShapeMatch contains no shape information.
</nierror>
<nierror code="-1074395286">
IMAQ Vision:  Invalid concentric rake direction.
</nierror>
<nierror code="-1074395285">
IMAQ Vision:  Invalid spoke direction.
</nierror>
<nierror code="-1074395284">
IMAQ Vision:  Invalid edge process.
</nierror>
<nierror code="-1074395283">
IMAQ Vision:  Invalid rake direction.
</nierror>
<nierror code="-1074395282">
IMAQ Vision:  Unable to draw to viewer. You must have the latest version of the control.
</nierror>
<nierror code="-1074395281">
IMAQ Vision:  Your image must be larger than its border size for this operation.
</nierror>
<nierror code="-1074395280">
IMAQ Vision:  ROI is not a rectangle.
</nierror>
<nierror code="-1074395279">
IMAQ Vision:  ROI is not a polygon.
</nierror>
<nierror code="-1074395278">
IMAQ Vision:  LCD image is not a number.
</nierror>
<nierror code="-1074395277">
IMAQ Vision:  The decoded barcode information did not pass the checksum test.
</nierror>
<nierror code="-1074395276">
IMAQ Vision:  You specified parallel lines for the meter ROI.
</nierror>
<nierror code="-1074395275">
IMAQ Vision:  Invalid browser image.
</nierror>
<nierror code="-1074395274">
IMAQ Vision:  Unable to create the channel usage
</nierror>
<nierror code="-1074395273">
IMAQ Vision:  Unable to set up the channel usage
</nierror>
<nierror code="-1074395272">
IMAQ Vision:  Unable to get the video digitizer.
</nierror>
<nierror code="-1074395271">
IMAQ Vision:  Unable to set the video digitizer parameters.
</nierror>
<nierror code="-1074395270">
IMAQ Vision:  Cannot divide by zero.
</nierror>
<nierror code="-1074395269">
IMAQ Vision:  Null pointer.
</nierror>
<nierror code="-1074395268">
IMAQ Vision:  The linear equations are not independent.
</nierror>
<nierror code="-1074395267">
IMAQ Vision:  The roots of the equation are complex.
</nierror>
<nierror code="-1074395266">
IMAQ Vision:  An internal error occurred in the peak/valley detection algorithm.
</nierror>
<nierror code="-1074395265">
IMAQ Vision:  The barcode does not match the type you specified.
</nierror>
<nierror code="-1074395264">
IMAQ Vision:  Full ASCII not found.
</nierror>
<nierror code="-1074395263">
IMAQ Vision:  No lit segment.
</nierror>
<nierror code="-1074395262">
IMAQ Vision:  The LCD does not form a known digit.
</nierror>
<nierror code="-1074395261">
IMAQ Vision:  An internal error occurred while attempting to access an invalid coordinate on an image.
</nierror>
<nierror code="-1074395260">
IMAQ Vision:  An internal memory error occurred.
</nierror>
<nierror code="-1074395259">
IMAQ Vision:  The version of LabVIEW or BridgeVIEW you are running does not support this operation.
</nierror>
<nierror code="-1074395258">
IMAQ Vision:  The filter width must be odd for the Canny operator.
</nierror>
<nierror code="-1074395257">
IMAQ Vision:  You supplied an invalid edge direction in the Canny operator.
</nierror>
<nierror code="-1074395256">
IMAQ Vision:  The window size must be odd for the Canny operator. 
</nierror>
<nierror code="-1074395255">
IMAQ Vision:  The input data is not initialized for the peak/valley algorithm.
</nierror>
<nierror code="-1074395254">
IMAQ Vision:  The peak/valley detector contains an insufficient number of input elements.
</nierror>
<nierror code="-1074395253">
IMAQ Vision:  Invalid learn mode.
</nierror>
<nierror code="-1074395252">
IMAQ Vision:  Invalid learn setup data.
</nierror>
<nierror code="-1074395251">
IMAQ Vision:  Invalid match mode.
</nierror>
<nierror code="-1074395250">
IMAQ Vision:  Invalid match setup data.
</nierror>
<nierror code="-1074395249">
IMAQ Vision:  At least one range in the array of rotation angle ranges exceeds 360 degrees.
</nierror>
<nierror code="-1074395248">
IMAQ Vision:  The array of rotation angle ranges contains too many ranges.
</nierror>
<nierror code="-1074395247">
IMAQ Vision:  Invalid template descriptor.
</nierror>
<nierror code="-1074395246">
IMAQ Vision:  Invalid template descriptor.
</nierror>
<nierror code="-1074395245">
IMAQ Vision:  Invalid template descriptor.
</nierror>
<nierror code="-1074395244">
IMAQ Vision:  Invalid template descriptor.
</nierror>
<nierror code="-1074395243">
IMAQ Vision:  The template descriptor was created in a newer version of IMAQ Vision. Upgrade to a higher version of IMAQ Vision to use this template.
</nierror>
<nierror code="-1074395242">
IMAQ Vision:  Invalid template descriptor.
</nierror>
<nierror code="-1074395241">
IMAQ Vision:  The template descriptor does not contain data required for rotation-invariant matching.
</nierror>
<nierror code="-1074395240">
IMAQ Vision:  Invalid template descriptor.
</nierror>
<nierror code="-1074395239">
IMAQ Vision:  Invalid template descriptor.
</nierror>
<nierror code="-1074395238">
IMAQ Vision:  The template descriptor does not contain data required for shift-invariant matching.
</nierror>
<nierror code="-1074395237">
IMAQ Vision:  Invalid template descriptor.
</nierror>
<nierror code="-1074395235">
IMAQ Vision:  The template image does not contain enough contrast.
</nierror>
<nierror code="-1074395234">
IMAQ Vision:  The template image is too small.
</nierror>
<nierror code="-1074395233">
IMAQ Vision:  The template image is too large.
</nierror>
<nierror code="-1074395232">
IMAQ Vision:  Do not use error codes from here to last OCR error code; they exist, but are not documented.
</nierror>
<nierror code="-1074395212">
IMAQ Vision:  The size of the template string must match the size of the string you are trying to correct.
</nierror>
<nierror code="-1074395211">
IMAQ Vision:  The supplied text template contains nonstandard characters that cannot be generated by OCR.
</nierror>
<nierror code="-1074395210">
IMAQ Vision:  At least one character in the text template was of a lexical class that did not match the supplied character reports.
</nierror>
<nierror code="-1074395203">
IMAQ Vision:  The OCR library cannot be initialized correctly.
</nierror>
<nierror code="-1074395201">
IMAQ Vision:  There was a failure when loading one of the internal OCR engine or LabView libraries.
</nierror>
<nierror code="-1074395200">
IMAQ Vision:  One of the parameters supplied to the OCR function that generated this error is invalid.
</nierror>
<nierror code="-1074395179">
IMAQ Vision:  The OCR engine failed during the preprocessing stage.
</nierror>
<nierror code="-1074395178">
IMAQ Vision:  The OCR engine failed during the recognition stage.
</nierror>
<nierror code="-1074395175">
IMAQ Vision:  The provided filename is not valid user dictionary filename.
</nierror>
<nierror code="-1074395174">
IMAQ Vision:  IMAQ Vision does not support the AutoOrientMode value you supplied.
</nierror>
<nierror code="-1074395173">
IMAQ Vision:  IMAQ Vision does not support the Language value you supplied.
</nierror>
<nierror code="-1074395172">
IMAQ Vision:  IMAQ Vision does not support the CharacterSet value you supplied.
</nierror>
<nierror code="-1074395171">
IMAQ Vision:  The system could not locate the initialization file required for OCR initialization.
</nierror>
<nierror code="-1074395170">
IMAQ Vision:  IMAQ Vision does not support the CharacterType value you supplied.
</nierror>
<nierror code="-1074395169">
IMAQ Vision:  IMAQ Vision does not support the RecognitionMode value you supplied.
</nierror>
<nierror code="-1074395168">
IMAQ Vision:  IMAQ Vision does not support the AutoCorrectionMode value you supplied.
</nierror>
<nierror code="-1074395167">
IMAQ Vision:  IMAQ Vision does not support the OutputDelimiter value you supplied.
</nierror>
<nierror code="-1074395166">
IMAQ Vision:  The system could not locate the OCR binary directory required for OCR initialization.
</nierror>
<nierror code="-1074395165">
IMAQ Vision:  The system could not locate the OCR weights directory required for OCR initialization.
</nierror>
<nierror code="-1074395164">
IMAQ Vision:  The supplied word could not be added to the user dictionary.
</nierror>
<nierror code="-1074395163">
IMAQ Vision:  IMAQ Vision does not support the CharacterPreference value you supplied.
</nierror>
<nierror code="-1074395162">
IMAQ Vision:  IMAQ Vision does not support the CorrectionMethod value you supplied.
</nierror>
<nierror code="-1074395161">
IMAQ Vision:  IMAQ Vision does not support the CorrectionLevel value you supplied.
</nierror>
<nierror code="-1074395160">
IMAQ Vision:  IMAQ Vision does not support the maximum point size you supplied.  Valid values range from 4 to 72.
</nierror>
<nierror code="-1074395159">
IMAQ Vision:  IMAQ Vision does not support the tolerance value you supplied.  Valid values are non-negative.
</nierror>
<nierror code="-1074395158">
IMAQ Vision:  IMAQ Vision does not support the ContrastMode value you supplied.
</nierror>
<nierror code="-1074395156">
IMAQ Vision:  The OCR attempted to detected the text skew and failed.
</nierror>
<nierror code="-1074395155">
IMAQ Vision:  The OCR attempted to detected the text orientation and failed.
</nierror>
<nierror code="-1074395151">
IMAQ Vision:  The OCR engine failed during the correction stage.
</nierror>
<nierror code="-1074395141">
IMAQ Vision:  The OCR engine could not find any text in the supplied region.
</nierror>
<nierror code="-1074395140">
IMAQ Vision:  One of the character reports is no longer usable by the system.
</nierror>
<nierror code="-1074395138">
IMAQ Vision:  The OCR region provided was too small to have contained any characters.
</nierror>
<nierror code="-1074395137">
IMAQ Vision:  Error initializing toolkit
</nierror>
<nierror code="-1074395136">
IMAQ Vision:  Last Error for OCR
</nierror>
</nidocument>